· MOSFET Output or Transistor Output
· Control Voltage: 4-32VDC
· Load Voltage: 50VDC、100VDC、200VDC、400VDC
· Load Current: 2A、3A、5A
· Dielectric Strength: 2500Vrms
· RoHS Compliant
· Plug in installation
· Optional base mounting
· Photoelectric isolation
KSOD Series Single Phase DC Output (KSOD series SSR)
General parameters
Name | KSOD Series SSR |
Load Voltage | 50VDC~400VDC |
Load Current | 2A/3A/5A |
Ambient Temperature Range | -30℃ ~ +80℃ |
Storage Temperature Range | -30℃ ~ +100℃ |
Weight (Typical) | 20g/50g |
Click the link below to download datasheet
General Notes
1. Soldering must be finished within 10 seconds at 260℃,or finished within 5 seconds at 350℃. Otherwise it may cause damage to the relay.
2. Terminal polarity must be observed. Otherwise it may cause damage to the relay.
3. When ambient temperature is above 25℃, the maximum load current decreases. See thermal derating curve.
4.Capacitive load will produce very high surge current at the moment of conduction, which may lead to the damage of solid state relay due to the excessive surge current. Therefore, if the actual load is capacitive, or the load has parallelled large capacitance, it is strongly recommended that NTC should be connected in series in the load loop to suppress surge current in order to avoid damage to the product.
5. When connection wiring to SSR, please ensure screws are torqued down properly. Recommended torque for screw is 8.8/1.0 in-lb/Nm.
6. For products with a base, the recommended installation torque for base wiring is 1N · m.
◆Product specifications are subject to change without notice. Please don’t hesitate to contact with us for any technical questions.